[[!img Error: "news/OSHUG.png" does not seem to be a valid png file]]

The second Open Source Hardware Camp will take place over the weekend of 15th & 16th September 2012, at the Birchcliffe Centre in Hebden Bridge, West Yorkshire. With nine talks on the Saturday and four parallel workshops on the Sunday.

Practical Experiences with the Google Android Accessory Development Kit (ADK)

The ADK is an exciting development platform that makes it possible to easily combine Android applications with custom hardware built around Arduino. Such combinations have the best of both worlds by enabling the creation of a mobile phone application with access to peripheral devices that is only limited by your imagination.

This talk will cover two projects that extend what the phone can do by integrating both input and output devices. And will cover some of the dos and don'ts of using the ADK and associated IDEs. If time permits there will also be a demonstration with a quick run through of the code.

The Internet of Things and Arduino

As connecting hardware to the network becomes cheaper and cheaper we're seeing the rise of what is being called the Internet of Things, or “IoT” for short.

This talk will give an introduction to the Internet of Things and explain how open hardware platforms such as Arduino are helping it grow. With plenty of examples of IoT projects, from using sensors to map global radiation levels to bakeries that tweet when the bread is fresh out of the oven.

Developing Linux on Embedded Devices

This talk will provide an introduction to developing Linux on embedded devices. Firstly we will look at the capabilities of popular boards such as the BeagleBone and the Raspberry Pi. Then using the example of a BeagleBone controller for a 3D printer the talk with explain how to develop for an embedded device. It will consider what comprises an embedded Linux software stack. The talk will discuss boot loaders, kernels and root filesystems. We will discuss what are the minimum software packages required in a root file system. The talk will then go on to consider the tools required to develop for an embedded target. It will look at what tools are available to help the embedded developer and speed up this development process. Once you have developed your software you need to debug it. The talk will look at what debugging tools are available for debugging embedded devices.

Interfacing the Raspberry Pi to the World

You've received your Pi, set up a web server on it and maybe played a few rounds of Quake. You're looking for a new challenge and suddenly the header on the corner of the board catches your eye. A quick Google search for "P1 Raspbery Pi" gets you to the eLinux wiki page on Low level peripherals, and you suddenly realise that you can do all sorts of fun stuff by adding extra bits to your Raspberry Pi using this magical expansion port. Where do you start? Is it safe to connect a motor directly to the pins? What sort of interesting components are out there?

Sensing Wearable Technology

An introduction to wearable technology that will include examples which incorporate sensors, plus work which makes use of the LilyPad Arduino, an open source, sewable microcontroller.

Running OpenBTS in the Real World

This talk will explore the OpenBTS project and describe how it uses software-defined radio and open source Internet telephony to create a small but complete GSM mobile phone network.

The 3D Printed Revolution

Over recent years Open Source 3D printers have quickly developed alongside their commercial counterparts offering affordable and accessible alternatives. This talk will cover experiences using commercial printers and how the speaker's interests have moved to open source designs and how the two compare. Examples will be shown of projects using these technologies, such as "Fable", a clock manufactured by Selective Laser Sintering, and a wrist watch designed to be printed on a RepRap. There will also be a run through of the design considerations and how files were created, fixed and sliced in preparation to print on a RepRap.

The Bots are Coming

In the last two decades we have seen software and data change the fabric of economics, and the advent of personal computing and the Internet enable many new business models. However, the next two decades will be even more radical as that wave of innovation shifts from the virtual domain to a physical manifestation. Atoms are the new bits and the open sourcing and democratisation of bot technology is allowing us to enter into an era of personal production. And this talk will explore how 3D printing and additive manufacturing are revolutionising production as we know it.

DIYBIO - The Next Frontier

DIYBIOMCR is an public group based at MadLab dedicated to making biology an accessible pursuit for citizen scientists, amateur biologists and biological engineers who value openness and safety. This talk will give an overview of the movement, and what is going on at MadLab involving not only biology but also diverse fields such as hardware-hackers, artists, journalists and the open-source movement.

Sunday Workshops

Workshops on building the Internet of Things with Arduino and the Google ADK, 3D Printing, Interfacing the Raspberry Pi and Building GSM Networks with Open Source.

For more information and to register visit the OSHUG event page.